Cast Iron Precision Angle Plate
[ Stock No：301 ]
- The base and upright surfaces accuracy is ensured.
- The base and upright surfaces are scrape finished.
- On the base and upright surfaces, slotted holes are provided for fixation of work pieces.
- It can be used as a machining jig if installed on machining centers.
- There is a support on the inner part for works longer than 200mm.
*We also manufacture similar products with special measurement.
| Code No. | Nominal Measurement | Measurement (L×W×H×tmm) |
No of Slotted Holes (pcs) |
Parallelism (μm) |
Mass (kg) |
|---|---|---|---|---|---|
| RA101 | 100 | 100×75×75×16 | 2 | 7 | 1.2 |
| RA102 | 125 | 125×100×100×16 | 3 | 8 | 2.1 |
| RA103 | 150 | 150×125×125×18 | 9 | 3.6 | |
| RA104 | 175 | 175×150×150×19 | 10 | 5.6 | |
| RA105 | 200 | 200×175×175×20 | 9.2 | ||
| RA106 | 250 | 250×200×200×22 | 17.0 | ||
| RA107 | 300 | 300×250×250×25 | 24.0 | ||
| RA108 | 350 | 350×300×300×25 | 4 | 38.0 | |
| RA109 | 400 | 400×350×350×35 | 70.0 | ||
| RA110 | 450 | 450×400×400×37 | 5 | 15 | 87.0 |
| RA111 | 500 | 500×400×400×45 | 107.0 | ||
| RA112 | 600 | 600×450×450×45 | 20 | 160.0 |
