Graduated Square (E Type) (Production example)

Graduated Square (E Type) (Production example)
  • On the long side interior angle and the short side exterior angle side surfaces, there is 1 mm interval graduation (One surface only)
  • Use for measurement of tools perpendicularity, and squareness of parts attached using jigs, products squareness, etc
  • Also very convenient for use as a marking square.

 

Nominal Measurement Measurement
(H×L×W×tmm)
Squareness
(μm)
Mass
(kg)
100 100×70×20×4 ±15 0.1
150 150×100×25×5 ±18 0.2
200 200×130×25×8 ±20 0.35
300 300×200×30×8 ±25 0.6
400 400×200×40×8 ±30 1.5
500 500×255×40×8 ±35 1.8
600 600×300×40×8 ±40 2.5
750 750×400×50×11 ±48 5.0
1000 1000×500×50×10 ±60 5.5

Other products of Square

Back to Archive

Inquiry

Head office

Tel. +81 258-22-1100

Tokyo Office

Tel. +81 3-3293-8881

Nagoya Office

Tel. +81 52-322-4031